Electrically heated Tilting Furnaces

Electrically heated Tilting Furnaces
T max 1200 °C and 1300 °C

Information

: TA 350/12/K

Rugged casing construction
Safe, reliable pouring using 2 hydraulic cylinders with end bearing dampers on tilting frame
Precision dosing at every tilting angle
Friendly working conditions due to very low outer casing temperature
Low energy consumption, low operating costs due to excellent thermal insulation (approx. 0.4 kWh/kg aluminium)
Very low heat loss
High-quality heating elements wound on ceramic tubes > Free heat radiation onto the crucible, low energy consumption, longer service life of heating elements
Uniform heating of melt and crucible due to heating from 3 sides, superb metal quality, good crucible life
Crucible protected by cover plate made of refractory concrete
Emergency outlet drain
Cable harness between control panel and furnace protected by flexible metal conduit, providing optimum protection against mechanical damage
Low maintenance costs

Technical Data

Model	Crucible	Capacity* [kg/h Al bei 700°C]	Melting rate* [kg/h Cu at 1000°C]	Power [kW]	T max [°C]	Ouside dimensions [mm] A B C			Voltage [V]	Weight [kg]
TA 30/12/K	A 70	32	47	18	1200	1540	1300	1160	400 3/N	950
TA 50/12/K	A 150	42	62	21	1200	1600	1400	1250	400 3/N	1200
TA 100/12/K	A 300	57	82	27	1200	1850	1550	1270	400 3/N	1600
TA 200/12/K	TP 287	125	190	53	1200	1950	1600	1400	400 3/N	1790
TA 350/12/K	TP 412	150	-	63	1200	2000	1650	1460	400 3/N	2180
TA 600/12/K	TP 587	205	-	82	1200	2150	1900	1670	400 3/N	2820
TA 800/12/K	TBN 800	255	-	102	1200	2250	2000	1670	400 3/N	3500

TK 70/13/K	A 70	32	47	18	1300	1540	1300	1160	400 3/N	980
TK 150/13/K	A 150	42	62	21	1300	1600	1400	1250	400 3/N	1300
TK 300/13/K	A 300	57	82	27	1300	1850	1550	1270	400 3/N	1650
TK 500/13/K	TP 287	125	190	53	1300	1950	1600	1400	400 3/N	1850

Other sizes on request · * The melting rates depend on crucible conductivity and specific operating conditions. Approx. 80% is achieved under normal conditions.